MB-1800B, 1800A/BR10 (June, 2001) 3/4
ATTACHMENT TABLE
＊Applicable by replacing the lifting hook of the button clamp mechanism with that for the MB-1800.
Application
For
flat button
For shank button
For
wrapped-around
button
For flat button and
wrapped-around button
(first process of button neck
wrapping)
Button diameter: 16mm or less
Responds to slight variations in the
button shank.
Small- to
large-button
thickness
5.0mm
For snap
For metal button
For stay button
For label attaching
Large-button
thickness 3.5mm
Medium-button
thickness 3.5mm
Small-button
thickness 3.5mm
Left
Right
1st process
2nd process
Button size
A: 0〜6.5mm
B: 0〜6.5mm
C: φ10〜φ28mm
Button size
A: 0〜6.5mm
B: 0〜6.5mm
C: φ20〜φ28mm
Button size
A: 0〜4.5mm
B: 0〜4.5mm
C: φ12〜φ20mm
Button size
A: 0〜3.5mm
B: 0〜3.5mm
C: φ10〜φ12mm
Button-to-material distance is
adjustable. The machine is capable
of sewing flat button without neck
wrap.
A: 3mm or more B: 12mm or less
The machine wrap the button neck
while moving the attachment back
and forth.
Button-to-material distance A: 5.5mm
Flat button sewing process or the first
process of button-neck wrapping is
enabled by sliding the neck wrapping
foot away from the sewing position.
To be used in combination with the
B2447-372-0A0 or 141-34050.
For the 141-34050
A: 3.5mm or more
Button-to-material distance
A: 5.5mm
Size
A: 8mm
Buttons with round shank
A: φ5mm
Cloth-to-button distance is small.
D2556-372-CAA
D2558-372-CAA
Sketch For MB-1800 For MB-373 For MB-377
146-17559
D2529-373-B00A
B2529-373-000
146-17658
146-17757
146-17856
B2447-372-0A0
141-34050
B2440-373-0A0
MAZ-046010A0
MAZ-172000A0
146-17955
146-18052
MAZ-039010A0
146-18151
Common
MAZ-031000AA
＊
B2401-373-0BA
＊
―
Not prepared
MAZ-040000AA
＊
MAZ-04000BAA
＊
B2552-373-BAA
＊
B2420-373-0AA
＊
MAT-64401ZBA
＊
Common
MAZ-201010A0
＊
Zigzag width: Max. 10mm
● Button clamp mechanism, lifting hook
(Part No.: 146-02502)
Attachments for sewing flat button, shank button, wrapped-around button,
snap and bartacking label are prepared. Note that the attachments for the
button clamp jaw lever of your MB-373 or -377 can be used with the MB-1800
only by replacing the lifting hook of the button clamp mechanism with the
lifting hook exclusive to the MB-1800 (Part No.: 146-02502).
Button diameter: 16mm or less
Shank size
A: 5〜6mm
B: 2.5〜3mm
―
―
―
―
―
―
―
―
―
―
―
B
A
C
B
A
A
A
A
B
A
A
A
To Next Page
Loading...
