JUKI LS-321 - Page 119

MB-372, 373 SERIES (June, 2001) 3/10
Possible sewing sizes of A : B
A=6mm, B=3mm
or A-5mm, B-2.5mm
B
1.5mm
Over
1.5mm
Under
16mm
φ5mm
Max. 28mm
5.5mm
pin
A mm
A: 9〜12mm (Z011) 9〜18mm (Z041)
A: 9〜12mm (Z099)
＊25mm in case of (A)
23mm in case of (B)
Cross section of button
(A) (B)
＊
Max. 6mm
Max. 5mm
Max. 28mm
A 5.5mm
Clamp
Clamp
■ Wrapped-around button
Wrapped-around
button
(first process)
(Note)
Distance between
the cloth and button
is not adjustable
Wrapped-around
button
(first process)
(Note)
Distance between
the cloth and button
is adjustable
Wrapped-around
button with stay
button
(first process)
Wrapped-around
button
with or without
stay button
(second process)
Wrapped-around
button
(second process)
Button sewing height
A: 5.5mm
Flat button sewing
process and the first
process of neck
wrapping can be
performed by sliding
the neck wrapping foot.
Button size
in common with the attachments of
MB-372 series & MB-373 series
Z004 (B2447-372-0A0)
Attachment for sewing wrapped-around
button (first process)
Z011 (MAT-61100ZA0)
Attachment for sewing wrapped-around
button (first process)
Z009 (MAT-60901ZA0)
Use this attachment in combination with
Z004, Z011 or Z041.
Z005 (B2440-372-0A0)
Attachment for sewing wrapped-around
button (second process)
Z016 (MAT-61601ZA0)
Attachment for sewing wrapped-around
button (second process)
Z004 (B2447-372-0A0)
Attachment for sewing wrapped-around
button (first process)
(In common with MB-372 series)
Z041 (MAZ-041010A0)
Attachment for sewing wrapped-around
button (first process)
Z039 (MAZ-0390100A0)
Use this attachment in combination with
Z004 or Z041.
Z035 (B2440-373-0A0)
Attachment for sewing wrapped-around
button (second process)
Z046 (MAZ-046010A0)
Attachment for sewing wrapped-around
button (second process)
Attachments
for MB-372 series
Attachments
for MB-373 series
■ Shank button
Shank button
with the size
indicated in the
right figures
Shank button
(A little different type of
Z003 or Z033)
Even if the shank shape
is a little different from
Z003 or Z033,
button sewing
can be performed.
Button with a shank
A: φ5mm
A clearance
provided between
the material and
button is small.
Button size
in common with the attachments of
MB-372 series & MB-373 series
Z003 (B2401-372-0BA)
Attachment for sewing shank button
Z010 (MAZ-010000AA)
Attachment for sewing shank button
Z010B (MAZ-01000IAA)
Attachment for sewing shank button
Z033 (B2401-373-0BA)
Attachment for sewing shank button
Z040 (MAZ-040000AA)
Attachment for sewing shank button
Z040B (MAZ-04000BAA)
Attachment for sewing shank button
Attachments
for MB-372 series
Attachments
for MB-373 series
Z099 (131-34050)
Attachment for sewing wrapped-around button (first process)
Z172 (MAZ-172000A0)
For flat button and button with neck wrap
(first process)
7