JUKI LS-321 - Page 136

LK-1900, 1904F, 1901, 1902 (June, 2001) 4/6
40
20
27
32.84.5
50
5.6
12
23 24.1
40
10
22
3.4 33.4
40.5
35
27
5
32.6
40
20
27
32.84.5
50
5.6
12
23 24.1
40
27
21
5.1 32.3
40.5
35
27
5
32.6
40
10
22
32.8
4.5
20
2
54
17.5
25
14.5
29
25
40
15
5.4
21.2
18.5
25
15
37.3
24
17.5
22
24
2.4
Work clamp foot
Feed plate
Application code
＊Finger guard
Remarks
1
141-16107
S
Standard accessory
for S (standard)
type machine head.
F
Standard accessory
for F (foundation)
type machine head.
★(1)
F
135-73407
For lengthwise
bartacking (packed
together with
accessories
supplied with F-
type machine head)
★(1)
H
135-48300
Standard accessory
for H (heavy-weight
material) type
machine head.
M
135-33104
Standard accessory
for M (knit and
knitting fabric) type
machine head.
141-16800
(without knurl)
141-16909
(without knurl)
135-54803 141-16206
135-18659 (asm.)
135-33104
23
135-71955 (asm.)
4
135-48151 (asm.)
5
135-42964 (asm.)
For JE: ★(1) Option
★(2) Packed together with accessories supplied with F-type machine head.
★(3) Standard accessory for F (foundation) type machine head.
＊Install a finger guard suitable for each work clamp foot when replacing the work clamp foot.
TABLE OF THE WORK CLAMP FOOT –––––– LK-1900
● Provided as standard
Work clamp foot
Feed plate
Application code
＊Finger guard
Remarks
6
135-48151 (asm.)
135-48003
S
135-48300
For extra-large
bartacking
For small bartacking
HSF
For lengthwise
bartacking
★(2)
F
For lengthwise
linear bartacking
F
135-33104
For small
bartacking
★(3)
141-16305 141-16602 141-16503
(without knurl)
141-16701
(without knurl)
135-33104 135-73407
7
135-48557 (asm.)
8
135-42451 (asm.)
9
135-71955 (asm.)
10
135-61360 (asm.)
141-16404
(without knurl)
11
135-18659 (asm.)
● Options
(Work clamp foot and feed plates other than standard ones are optional parts.)