AMS-210DHL6100SZ (June, 2001) 2/2
PROGRAMMING FUNCTIONS
● With its large memory, the machine responds to many different sewing patterns.
Sewing settings can be established and sewing patterns programmed entirely through the
operation panel.
● Ample storage capacity: maximum of 360,000 stitches on a floppy disk, or 691 patterns on
a 2DD disk or 999 ones on a 2HD disk.
● A maximum of 20,000 stitches can be input per pattern. With this large storage capacity,
the machine supports embroidery patterns with large numbers of stitches.
● A sewing pattern can be enlarged/reduced without changing the stitch length.
● Functions that are frequently used during pattern data input (regular stitching (linear,
spline), point stitching, jumping, thread trimming, etc.) are allocated to specific keys on
the operation panel. This reduces the time required for input of pattern data.
OPTIONS
WHEN YOU PLACE ORDERS
AMS-210DHL6100SZ
● Machine head
J-AM2000L B
● Table stand
Code
A
C
Pedal switch
2-pedal unit
PK 2-pedal unit
Code
C
K
R
D
L
M
Power supply
100〜120V
Single-phase 200〜240V
220〜415V
200〜240V
3-phase
220〜415V
220〜415V
(For CE)
―
B5019-222-0B0
PJ-0320525-03
PJ-0205000-02
B4717-223-C00
BT040-025-1EB
BT060-040-1EB
B4712-215-0A0
SK-3312500-SE×2
SS-6151812-TP
WP-0641601-SD×5
B4720-215-0B0
―
B2585-210-DB0
B2586-210-DB0
M8607-580-AA0
PGM-20
―
―
MU12
―
―
Programming software for computer controlled
sewing machine
Thread tension controller No.3
Needle cooler
Milling unit
One-touch utility clamp for the monolithic
feeding frame
One-touch utility clamp for separately-driven
pneumatic feeding frame
I/O expansion unit
The PGM-20 is provided with many different input functions
to permit interactive data creation, free from difficulties,
using a general-purpose personal computer or digitizer.
The tension controller unit is used to partially change the
needle thread tension during the sewing of a pattern.
―
The milling unit can be installed on the machine to allow
the operator to easily machine a feeding frame or feed
plate.
The feeding frame and the feed plate can be quickly
changed without any tools.
The machine is provided with external input/output ports
that are very convenient when re-modeling the machine
with accessory devices attached.
Model Part No. Description Feature
Code
B
Control panel
English and pictograph
To Next Page
Loading...
