ASN-395L, 395T, 397 (June, 2001) 1/2
Double stacker
Main body
Auxiliary
table
Single stacker
1000
610
270 1500 400
1820
1200
350
750
805
Cloth receiving board
ASN-395L
SPECIFICATIONS
● The MO-3904 model newly-developed super high-speed overlock machine
head is adopted. The machine ensures consistent sewing performance
even at the max. sewing speed of 8,000rpm, thereby improving productivity
by a large margin. The machine securely clamps the material and feeds it
straight without fail, ensuring smooth and speedy sewing performance.
● The machine incorporates a newly-developed material edge guide.
This means that the machine is capable of finishing light-weight materials
with neither curled nor rolled-in edges and can sew curves with consistency
while preventing stitches from slipping off the edge of the material.
Furthermore, the machine can sew with low thread tension to suit the type
of material to be sewn. Consequently, the machine achieves excellent
seam quality when sewing soft and delicate materials.
● ASN-397
The sensor detects sharp in-curves or out-curves of files and seats of slacks
and automatically adjusts the sewing speed. This means that the procedure
of manually changing the sewing speed at curves of the material is no longer
necessary. Thanks to this mechanism, the operator can operate the sewing
machine without any trouble in areas where the material edge is rolled in.
Partial shirring can be performed by setting data in the stitching program.
The sensor functions according to the specified data and instructs the
machine to perform partial shirring, thereby preventing trouble caused by
improper stretching/shirring of the material.
ASN-395L
(standard air pressure type)
ASN-395T
(standard airless type)
ASN-397
(high -grade type)
Automatic Serging Machine
Model name
Machine head
Max. sewing speed
Stitch length
Lift of the presser foot
Overedging width
Needle (at the time of delivery)
Chain-off thread trimmer
Sewing specifications
Class of work
Speed control function
Cloth control device
(sharp curve sewing device)
Cloth receiving board
Curve detecting function
Curl blower and table air blower
Table lifting device
Partial shirring device
Stacker
Lubrication
Lubricating oil
Power requirement
Power consumption
Compressed air and air consumption
Dimensions (mm)
Total weight
ASN-397
Can be set at either
"automatic" or "manual"
Provided as standard
Provided as standard
Both out-curve and
in-curve are detected
Provided as standard
Provided as standard
Built-in differential-feed
mechanism
ASN-395L ASN-395T
Deferential-feed mechanism
(option)
190kg (when all the optional
devices are installed: 220kg)
200kg (when all the optional
devices are installed: 210kg)
200kg (when all the optional
devices are installed: 230kg)
Option
700W
Automatic (machine head)
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Single-phase 190〜250V, 3-phase 220〜240V, 380〜440V, 220V, 380V
―
―
50HZ: 835W, 60H: 905W
―
Exclusive for MO-3904
8,000rpm
0.8〜4mm
Max. 7mm
4.0mm, 4.8mm, 5.6mm
DC×27 (#11) #9〜#14
T038 (suction type side cutter)
Cutting curve : 200R or more (40R or more when cloth control device is used)
Cloth size : Width 400mm or less
Length 480mm or more (length for which stacking is possible)
Number of cloth : Limited to 1.
Men's slacks, one-piece, skirt, pants, coat etc.
Manual
Option
Option
―
―
―
0.5MPa (5kgf/cm
2
), 220N /min
(when the stacker is used: 250N /min)
0.5MPa (5kgf/cm
2
), 170N /min
(when the stacker is used: 220N /min)
To Next Page
Loading...
