V050 SERIES (June, 2001) 4/4
V050 SRIES/MODEL OF SEWING MACHINE CORRESPONDENCE TABLE
REPLACEABLE ROLLER
Model Name
DDL-5530N
DDL-5550N, -7
DDL-5600N, -7
DLD-5430N, -7
DLU-5490N, -7
DLN-5410N, -7
Model Name
LH-1150 series
LH-3100 series
MS-1190
MH-380・382
MH-481, -5
MH-484, -5
MO series
＊Numeric values: Center-to-center distance between the needle entry to the roller (unit: mm)
＊V050 series can be installed on the models given in the table above whether or not the machine is provided with a thread trimmer/wiper.
＊For any model marked with a triangle (△) in the above table, V050 series will be to order.
V051A
○ 28
○ 28
○ 28
○ 28
△ 56
V051B
○ 28
V051C
○ 28
○ 28
○ 28
○ 28
△ 56
Large roller
type
V053A
○ 54
○ 78
Large roller
type
V054A
○
Proximity type
V055A
○ 32
○ 34
○ 30
Top and bottom
roller type
V053B
○
○
Large roller
type
V055B
○ 56
○ 52
○ 49
Top and bottom
roller type
V058A
○
Large roller
type
V053C
○ 78
Top and bottom
roller type
V053D
○
V051D
○ 28
V052A
○ 52
○ 52
○ 52
○ 52
○ 52
○ 82
V052B
○ 52
○ 52
○ 52
○ 52
○ 52
○ 82
V056A
○
○
○
○
○
○
For 1-needle, lockstitch machine
Proximity type
With a side plate and an AK
device type
Large roller type
Top and bottom
roller type
For LH series
With a back tacing solenoid type
For MS series For MH series For MO series
Top roller
Top roller
Bottom roller
V051A
V051B
V055A
V052
V053A
V053B
V054
V055B
V056
V058
V053B
V056
V058
Roller material
Roller surface
Selection code
Diameter 25mm
×
width 8mm
Selection code
Diameter 55mm
×
width 50mm
Selection code
Diameter 55mm
×
width 35mm
Selection code
Diameter 55mm
×
width 15mm
Selection code
Diameter 25mm
×
width 80mm
Polyurethane
Plane
PA25×8
PA55×50
PA55×35
PA55×15
PA25×80
Steel
60 tooth
―
SA55×50
SA55×35
SA55×15
―
(Note)Standard roller for V052A, V052B, V053A and V055B is 55mm in diameter and 15mm in width.
In addition, other two different kinds of rollers are available as renewal parts, one is 50mm in width and the other is 35mm in width. Select an
appropriate roller in accordance with sewing materials to be used and applications of the machine when placing your order for a V050 device or
separately place an order for a renewal roller.
To Next Page
Loading...
