JUKI LS-321 - 2-needle, Needle-feed, Lockstitch Machine; LH-1152; SPECIFICATIONS; 2-needle, Bottom-feed, Lockstitch Machine

LH-1152, 1152-7, LH-1150 (June, 2001) 1/2
LH-1152-7-WB/CP-160B
● Thanks to the ideal stroke of thread take-up which provides an
adequate drawing amount of needle thread and thread tension control
mechanism which allows independent adjustment of the right and left
threads, the machine ensures consistent formation of stitches even
when it runs at a high speed and flexibly adapts to a change of sewing
materials.
● An exclusive gauge is respectively prepared for light-weight materials,
foundation, medium-weight materials and jeans to allow the machine
to adapt to changes of materials.
SPECIFICATIONS
● The machine incorporates a gauge exclusively designed for light-weight
materials and reduces the number of revolutions, thereby effectively
prevents puckering and material slippage that are likely to occur with
light-weight materials.
2-needle, Bottom-feed, Lockstitch Machine
LH-1150
2-needle, Needle-feed, Lockstitch Machine
LH-1152
LH-1152-7
(with an automatic thread trimmer)
● Without an automatic thread trimmer
Model name
Application
Feed method
Max. sewing speed
Max. stitch length
Lift of the presser foot
Hook
Needle
(at the time of delivery)
Thread take-up
Needle bar stroke
Lubrication
Lubricating oil
Distance from
needle to machine arm
Bed size
Weight of the machine
head
LH-1152A
For light-weight materials
LH-1152S
For medium-weight materials
LH-1152F
For foundation
LH-1152G
For jeans
LH-1150A
For light-weight materials
Needle-feed
4,500rpm
Bottom-feed
3,500rpm
4mm4mm 6mm
By hand: 5.5mm, By knee: 10mm
Vertical-axis regular hook
SG×1906 (#9 ) #9〜#16
For JE: 134 (Nm65)
DP×5 (#14) #11〜#22
For JE: 134 (Nm90)
SG×1965 (#9) #9〜#11
For JE: 134 (Nm65)
DP×5 (#21) #18〜#22
For JE: 134 (Nm130)
DP×5 (#11) #9〜#16
For JE: 134 (Nm75)
Link type
33.4mm
Fully automatic lubrication system by means of a pIunger pump
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
245mm
517mm×178mm
38Kg
● With an automatic thread trimmer
Model name
Application
Feed method
Max. sewing speed
Max. stitch length
Lift of the presser foot
Hook
Needle
(at the time of delivery)
Thread take-up
Needle bar stroke
Lubrication
Lubricating oil
Distance from
needle to machine arm
Bed size
Weight of the machine
head
Power requirement
LH-1152S-7
For medium-weight materials
LH-1152G-7
For jeans
By hand: 5.5mm, By knee: 10mm
Vertical-axis regular hook
DP×5 (#14) #11〜#22, For JE: 134 (Nm75)
DP×5 (#21) #18〜#22, For JE: 134 (Nm130)
Link type
33.4mm
Fully automatic lubrication system by means of a plunger pump
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
245mm
517mm×178mm
43Kg
Single-phase 100〜120V, 200〜240V, 3-phase 200〜240V
Needle-feed
4,500rpm
4mm
6mm
2