MO-3900 SERIES (June, 2001) 5/6
● Chain-off thread trimming device
Model Part No.
Application
Description Feature
T039
T040
T041
T042
T047
MAT-039001A0
MAT-039002A0
MAT-040001A0
MAT-040002A0
MAT-040001AA
MAT-040002AA
MAT-041000A0A
MAT-042000A0
MAT-047000A0
One-touch type tape cutter and chain-off thread
trimming device (electromagnetic type)
Automatic tape cutter and chain-off thread trimming
device
(number-off-stitch control and electromagnetic type)
Pneumatic flat cutter
Pneumatic side cutter
Pneumatic flat cutter
Chain-off thread suction device to which the chain-off
thread trimming device
MC-7A • MC-8
MC-9
Autolifter which can be attached to the chain-off thread suction device
AK65 (with an electronic-stop motor or AC servomotor)
― (MC-9 is equipped with an auto-lifter)
For 110, 115, 220, 240V
For 220, 380, 415, 440V
For 110, 115, 220, 240V
For 220, 380, 415, 440V
For 110, 115, 220, 240V
For 220, 380, 415, 440V
―
―
―
MO-
3600
MO-
3700
MO-
3900
● Chain-off thread suction device
MC-4
MC-5
MC-8
MC-9
MC-24
―
―
―
―
―
Pneumatic chain-off thread suction device (pedal type)
Pneumatic chain-off thread suction device
Pneumatic chain-off thread suction device
(chain-off thread and cloth chips)
Provided with the function of MC-8 and an auto-lifter
Pneumatic chain-off thread suction device
(chain-off thread and cloth chips)
―
―
―
―
―
● Auto-lifter
＊The aforementioned devices are not equipped with an air regulator. Please purchase the following components when you need to regulate air pressure.
■ [Reference] Combination table of “chain-off thread suction device” and “auto-lifter” which correspond to “chain-off thread trimming device”
AK25
AK32
AK49
AK52
AK65
AK101
GAK-250000A0
GAK-320000A0
GAK-490000A0
GAK-520000A0
GAK-650000A0
GAK-A01000A0
Electromagnetic type
Pneumatic type
Pneumatic type (operated by pedal)
Pneumatic type (with chain-off thread suction device)
Electromagnetic type
Pneumatic type (for servomotor)
―
―
―
―
―
―
―
―
―
―
PF-0552010-B0
GMD-01080000×2
F1021-003-000
GAS-12063000＊
Air regulator (F.R. unit asm.)
Fixing screw for F.R. unit asm.
Tube connector (male)
One-touch connector
―
―
―
＊Selection parts instead of the tube connector
Chain-off thread trimming
device
T039
MC-7A
MC-5
MC-24
AK32 (any motor will do)
AK65 (with an electronic-stop motor or AC servomotor)
AK32 (any motor will do)
AK32 (any motor will do)
T040
＊―
MC-4
MC-7A • MC-8
MC-9
AK52 (any motor will do)
AK65 (with an electronic-stop motor or AC servomotor)
AK65 (with an electronic-stop motor or AC servomotor)
― (MC-9 is equipped with an auto-lifter)
T041
or
T042
＊AK52 is equipped with a chain-off thread suction device.
● Garthering device
S159
S160
S161
S162
MAS-159000A0
MAS-160000A0
MAS-161000A0
MAS-162000A0
Swing-type gathering device
(interlocked with pedal/S159 is used with a safety stitch
machine)
Swing-type gathering device
(interlocked with pedal/S160 is used with an overlock
machine)
Swing-type gathering device
(lever-operated/S161 is used with a safety stitch machine)
Swing-type gathering device
(lever-operated/S162 is used with an overlock machine)
DEVICES AND ATTACHMENTS
MO-3600, MO-3700 and MO-3900 SERIES
For semi-
sunken type
For fully-
sunken type
● Blower-type chain-off thread suction device
MC-7A ― (chain-off thread and cloth chips) ―
The attachment opens with the presser foot pedal. This
facilitates material setting on the machine. Furthermore,
a knee-control type differential-feed adjusting device is
built in the attachment. It controls a differential-feed
ratio as desired, thereby enabling the operator to make
beautiful gathers.
The attachment is used to perform two different
processes, joining fabric process and gathering process,
at a time. The attachment can be opened/closed by
using the lever (manually operated).
The differential-feed ratio is controlled with the knee lever.
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
― ― ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
― ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
To Next Page
Loading...
