MOR-3900 SERIES (June, 2001) 5/6
● Blind hemming device
■ [Reference] Combination table of “chain-off thread suction device” and “auto-lifter” which correspond to “chain-off thread trimming device”
＊AK52 is equipped with a chain-off thread suction device.
● Gathering device
DEVICES AND ATTACHMENTS
● Chain-off thread trimming device
● Chain-off thread suction device
● Auto-lifter
Model Part No. Description Feature
T039
T040
T041
T045
MAT-039003A0
MAT-039004A0
MAT-040005A0
MAT-040006A0
MAT-040005AA
MAT-040006AA
MAT-041000AB
MAT-045000A0
One-touch type tape cutter and chain-off thread
trimming device (electromagnetic type)
Automatic tape cutter and chain-off thread trimming
device
(number-off-stitch control electromagnetic type)
Pneumatic flat cutter
Pneumatic side cutter
For 110, 115, 220, 240V
For 220, 380, 415, 440V
For 110, 115, 220, 240V
For 220, 380, 415, 440V
For 110, 115, 220, 240V
For 220, 380, 415, 440V
―
―
For semi-
sunken type
For fully-
sunken type
MC-4
MC-5
MC-8
MC-9
MC-24
―
―
―
―
―
Pneumatic chain-off thread suction device (pedal type)
Pneumatic chain-off thread suction device
Pneumatic chain-off thread suction device
(chain-off thread and cloth chips)
Provided with the function of MC-8 and an auto-lifter
Pneumatic chain-off thread suction device
(chain-off thread and cloth chips)
―
―
―
―
―
AK32
AK49
AK52
AK101
GAK-320000A0
GAK-490000A0
GAK-520000A0
GAK-A01000A0
Pneumatic type
Pneumatic type (pedal type)
Pneumatic type
(with chain-off thread suction device)
Pneumatic type (for servomotor)
―
―
―
―
● Blower-type chain-off thread suction device
MC-7A ― (chain-off thread and cloth chips) ―
＊The aforementioned devices are not equipped with an air regulator. Please purchase the following components when you need to regulate air pressure.
―
―
―
―
PF-0552010-B0
GMD-01080000×2
F1021-003-000
GAS-12063000＊
Air regulator (F.R. unit asm.)
Fixing screw for F.R. unit asm.
Tube connector (male)
One-touch connector
―
―
―
＊Selection parts instead of the tube connector
Chain-off thread
trimming device
T039
T040
Chain-off thread suction device to which
the chain-off thread trimming device
MC-7A • MC-8
MC-9
Auto-lifter which can be attached to the chain-off thread suction device
AK65 (with an electronic-stop motor or AC servomotor)
AK101 (for JUKI AC servomotor)
― (MC-9 is equipped with an auto-lifter)
MC-7A
MC-5
MC-24
AK32 (any motor will do)
AK65 (with an electronic-stop motor or AC servomotor)
AK32 (any motor will do)
AK32 (any motor will do)
＊―
MC-4
MC-7A • MC-8
MC-9
AK52 (any motor will do)
AK65 (with an electronic-stop motor or AC servomotor)
AK65 (with an electronic-stop motor or AC servomotor)
― (MC-9 is equipped with an auto-lifter)
T041
or
T045
S167 MAS-167000A0
Swing-type upper-cloth gathering device
(interlocked with pedal)
The attachment opens interlocking with the presser foot pedal.
This facilitates material setting on the machine. Furthermore, a knee-
control type differential-feed adjusting device which is used to control
a differential-feed ratio as desired, is built in the attachment, thereby
enabling the operator to make beautiful gathers.
L121
L122
L123
MAL-121000A0
MAL-122001A0
MAL-122002A0
MAL-122001AA
MAL-122002AA
MAL-123000A0
Blind stitch hemming attachment
Automatic folded-edge controlled blind hemming
device
(The attachment automatically detects the
overlapped section of a material. Then, it makes the
needle enter the material deeper to prevent stitch
deviation.)
Spring-type folded-edge controlled bottom hemming
device
A ruler used for blind hemming in knits
For 110, 115, 220, 240V
For 220, 380, 415, 440V
For 110, 115, 220, 240V
For 220, 380, 415, 440V
When the overlapped section of a material is reached, the blind
hemming guide will move sufficiently to prevent stitch deviation.
Flat
upper knife
Square
upper knife
To Next Page
Loading...
