To Next PageTo Next Page
Need help?Do you have a question about the JUKI LU-2210N-7 and is the answer not in the manual?
General| Stitch Type | Lockstitch |
|---|---|
| Max Stitch Length | 5 mm |
| Motor Type | Servo motor |
| Needle bar stroke | 36 mm |
| Alternating vertical movement | Yes |
| Lubrication | Automatic |
| Thread trimmer | Yes |
| Knee lifter | Yes |
| Motor | Servo Motor |
| Type | Lockstitch |
| Lubricating oil | JUKI Machine Oil |
| Maximum Sewing Speed | 2, 800 sti/min |
| Presser Foot Lift | 12 mm |
Covers safety devices, trained operators, personal protection, and operational precautions.
Details safety for repairs, electrical components, pneumatic systems, and grounding.
General advice for safe operation, like keeping hands away from moving parts.
Focuses on electrical grounding, power plug handling, and preventing dew condensation.
Instructions for initial cleaning, oiling, and setup checks before first use.
Verifying voltage, rotation direction, and ensuring the oil level is adequate.
Procedures for routing and connecting various machine cords.
Instructions for filling the machine's oil tank with specified lubricating oil.
Description of the 5 operational stages of the sewing machine pedal.
Detailed threading sequences for the machine head for LU-2210N-7 and LU-2260N-7.
Ensuring correct alignment and clearance between the needle and hook.
Identifies causes and corrective measures for thread breakage and stitch skipping.
Addresses issues with loose stitches and thread slipping off the needle.
Explains problems with thread not cutting sharply or remaining uncut.
