– 2 –– 2 –‒ 2 ‒
. CONFIGURATION OF THE MACHINE COMPONENTS
Presser spring regulator
Eye guard cover
Needle bar thread take-up cover
Throat plate
Oil circulation inspection windows
Needle tip silicon oil lubricating unit
Oil hole cap
Differential lock nut
Micro-lifter
Micro-adjustment knob
Needle thread silicon oil lubricating unit
Finger guard
Thread guide No. 1
Rocking thread take-up
Upper pulley
Front cover
Thread tension nut
Needle bar thread take-up thread receiver
Oil gauge
Silicon container thread guide
Feed regulating knob
Belt cover
To Next Page
Loading...
