To Next PageTo Next Page
Need help?Do you have a question about the JUKI MH-382 and is the answer not in the manual?
General| Stitch Type | Lockstitch |
|---|---|
| Stitch Length | 5 mm |
| Needle Type | DB x 1 |
| Lubrication | Automatic |
| Presser Foot Lift | 13 mm |
| Motor | AC Servo Motor |
Essential guidelines to read and keep the manual before using the machine.
Lists situations requiring the machine's power to be turned off for safety.
Steps for setting up the machine, including table, wiring, grounding, and motor.
Pre-operation checks of connectors and cables.
Keeping hands and body clear of moving parts.
How to adjust belt tension by modifying motor height for correct sag.
How to adjust oil supply to needle bar crank using the adjusting pin.
Step-by-step guide for passing the needle thread through the machine head.
How to adjust the tension for the needle thread.
How to adjust the tension for the looper thread.
How to adjust the pressing force of the presser foot using the screw.
Steps for correctly inserting the needle, including orientation and type.
How to adjust the feed dog's timing relative to the needle.
Adjusting the timing of the looper relative to the needle's bottom dead point.
Causes and solutions for thread breaking issues.
Causes and solutions for skipped stitches on the needle thread.
Causes and solutions for needles breaking during operation.
