Need help?Do you have a question about the JUKI MO-6800S Series and is the answer not in the manual?
General| Brand | JUKI |
|---|---|
| Model | MO-6800S Series |
| Category | Sewing Machine |
| Language | English |
Details of the sewing machine head, including speed, stitch length, needle gauge, and overedge width.
Details of the control box, including supply voltage, frequency, operating environment, and input power.
Identification of the main components of the sewing machine with numerical labels for easy reference.
Instructions for assembling and installing the sewing machine table and its stand components.
Steps for mounting the pedal sensor onto the table and positioning the sewing machine head.
Procedure for securely attaching the connecting rod to the pedal lever using a nut.
Guidance on connecting the pedal sensor cable to the electrical box connector, emphasizing safety.
Instructions for connecting the power cord, including ground wire attachment and voltage checks.
Explanation of how to operate the power switch and important safety precautions during activation.
Instructions on adding lubricating oil to the machine, specifying the type and fill level.
Steps for draining old oil from the oil tank and refilling with new oil, including replacement intervals.
Procedure for replenishing grease in the needle bar and looper compartments for specific models.
Detailed illustrations and instructions for threading the sewing machine for different models.
Guidance on adjusting thread tension nuts and needle thread length for proper stitch formation.
Instructions for safely replacing the sewing machine needle, including correct insertion and tightening.
Procedure for adjusting the stitch length based on material and other relevant factors.
Steps for adjusting the differential feed ratio to control fabric feeding and prevent puckering.
Detailed instructions for replacing both the upper and lower knives for optimal cutting performance.
Guide on adjusting the overedge width by manipulating the knife holder positions.
Instructions for setting the correct needle height relative to the throat plate for proper stitching.
Steps for adjusting the presser foot position and its lifting amount for various models.
Instructions for adjusting the height and inclination of the feed dogs for accurate fabric feeding.
Critical measurements and adjustments for needle-looper alignment for optimal stitch formation.
Procedure for adjusting the front/rear travel of the double chainstitch looper for correct movement.
Explanation of the controls and functions of the machine's operation panel and buttons.
Displays actual shapes of Arabic figures and letters for comparison with the machine's display.
Step-by-step guide on how to select and set various functions using the operation panel.
A comprehensive table listing function numbers, items, descriptions, ranges, and initial values.
In-depth explanations for setting key functions like needle stop position and soft-start.
Instructions on how to reset function settings to stored or factory default values.
Guide on adjusting the brightness and color temperature of the hand LED illumination.
Information regarding the USB port, its specifications, and safe connection of devices.
Schedule and tasks for daily, weekly, and monthly maintenance to ensure machine longevity.
Table of standard dimensions for adjusting the looper and needle guard for various models.
Provides dimensional data for setting the positions of thread take-ups and looper thread cams.
A list of error codes with their corresponding descriptions for troubleshooting machine issues.
Technical drawings and dimensions for the sewing machine table.
Dimensional specifications for the fully-sunken type table, including weight.
Dimensional specifications and weight for the auxiliary table used with the fully-sunken table.
Technical drawing and dimensions for the bracket type of the fully-sunken table.
To Next Page
