– 4 –
2) Assemble the waste disposal set and the thread stand.
3) Assemble the motor starting pedal
❺
to the left side, and the presser foot pedal
❻
to the right side.
❶
3-2. Installing the pedal sensor
1) Install the pedal sensor to the table with
mounting screws
❶
supplied with the unit.
It is necessary to install the pedal sensor at such
a position that the connecting rod is perpendicu-
lar to the table.
2) After the completion of installation of the pedal
sensor on the table, place the sewing machine
head on the table.
❺
❻
To Next Page
Loading...
