DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
We hereby declare that the sewing machine (sewing head) described below ;
1. Must not be put into service until the machinery to which it is incorporated has been declared in
conformity with provisions of the Machinery Directive 2006/42/EC,and
2. Conforms to the essential requirements of the Machinery Directive 2006/42/EC, described in the
technical documentation,and
3. To be prepared with above technical documentation compiled in accordance with part B of Annex
VII,and
4. Also to conform to the RoHS Directive 2011/65/EU
5. Relevant information on which should be transmitted in response to a reasoned request by the
national authorities,by the electronic method or other according to the request.
Applied harmonized standards, in particular :
EN ISO12100, EN ISO10821, EN 50581
Manufacturer :
JUKI CORPORATION
2-11-1, Tsurumaki, Tama-shi, Tokyo, Japan
Model
Description Industrial Sewing Machine
Function make stitches and sew
MO-6800S Series
vii
TRIAL MODE − a valid license will remove this message. See the keywords property of this PDF for more information.
To Next Page
Loading...
