PLH981
PLN985
Needle gauge Code
1.2mm 12
1.6mm 16
2.0mm 20
2.4mm (standard) 24
Needle gauge Code
1.6mm 16
2.4mm (standard) 24
PLH982B
PLN986B
PLH-981 PLN-986
Please note when placing orders, that the model name
should be written as follows:
●To order, please contact your nearest JUKI distributor.
PLN-986PLN-985•986
MODEL NAME
Feed system
Max. sewing speed
Max. stitch length
Needle bar stroke
Needle gauge (mm)
Lift of the presser foot
Thread take-up
Hook
Needle (at the time of delivery)
Thread
Lubrication
Lubricating oil
Post height
Bed size
Weight of the machine head
PLH-981 PLH-982 PLN-985 PLN-986
1-needle 2-needle 1-needle 2-needle
Bottom-feed Needle-feed
2,500rpm
4mm (normal/reverse feed)
36mm 33.4mm
― 1.2, 1.6, 2.0, 2.4 (standard) ― 2.0, 2.4 (standard)
By hand: 7mm, By knee: 10mm By hand: 6.5mm, By knee: 9mm
Slide type
Vertical-axis hook
DP×5 (#18) #16〜#21 DP×5 (#16) #16〜#21
#40〜#8, B33〜B92, Nm=90/3〜30/3
By an oiler
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
178mm 179mm
517mm×178mm
36kg 40kg
CONSISTENT SEAM QUALITY
THE MACHINE HEAD STRUCTURE IS
DESIGNED TO IMPROVE OPERABILITY.
GAUGE TABLE (2-NEEDLE TYPE) WHEN YOU PLACE ORDERS
SPECIFICATIONS
Needle
gauge
1.2mm
1.6mm
2.0mm
2.4mm
(standard)
Gauge
set
210-16357
210-16159
210-16258
210-16050
Needle
clamp
210-17405
210-17504
Needle
guide
210-18908
210-18809
Throat
plate
210-16308
210-16100
210-16209
210-16019
Feed
dog
210-21100
210-21209
210-21308
Needle
gauge
1.6mm
2.4mm
(standard)
Gauge
set
210-32156
210-32255
Needle
clamp
210-17405
210-17504
Needle
guide
210-33006
210-33105
Throat
plate
210-32107
210-32206
Feed
dog
210-31109
210-31208
PLH-982
PLN-986
With JUKI’s unique slide thread take-up lever, feed mechanism,
and vertical-axis hook, the machine provides well-tensed, neatly
finished seams every time.
The stitch length can easily be adjusted with the stitch dial.
Reverse-feed stitching is actuated by a simple press of the lever.
The machine incorporates a large pulley that can be turned
smoothly by hand.
The face plate is designed to provide a clear view of the needle
entry area and enable smooth thread feeding.
● 1-needle, Needle-feed
● 2-needle, Needle-feed
● 1-needle, Bottom-feed
● 2-needle, Bottom-feed
MARKETING & SALES H.Q.
✽
Specifications and appearance are subject to change without prior notice for improvement.
✽
Read the instruction manual before putting the machine into service to ensure safety.
✽
This catalog is printed on recycle paper.
JUNE, 2002 Printed in Japan(AD)
8-2-1
, KOKURYO-CHO, CHOFU-SHI,
TOKYO
182-8655
, JAPAN
PHONE :
(
81
)
3-3480-2357, 2358
FAX :
(
81
)
3-3430-4909, 4914
http://www.juki.com
The environmental management system to promote and conduct
➀the technological and technical research, the development and
design of the products in which the environmental impact is
considered,
➁the conservation of the energy and resources, and the recycling,
in the research, development, design, distribution, sale and
maintenance service of the industrial sewing machines,
household sewing machines and industrial-use robots, etc. and
in the purchase, distribution and sale of the household
commodities including the healthcare products.
HEAD OFFICE
EMS Accreditation
RE005 089
ISO14001:1996
REG.NO.JSAE389
●
●●
●
●●
To Previous Page
Loading...
Need help?
General
