ENGLISH
56
ASSEMBLY
IMPORTANT:
Unpack the tool and check that all the parts are
present and undamaged.
Fig. 1
Remove the transport protection under the moto
and place the saw bench on a suitable work surface.
Fig. 1
Fig. 1.1
Secure the leg to the bench with two M6 x 16
hexagonal screws, two 6 mm washers and two M6
nuts. Tighten the screw joints gently by hand.
Fig. 1.1
Fig. 2
Secure the power switch to the bench with two M6 x
16 hexagonal screws, two 6 mm washers and two
M6 nuts.
Fig. 2
To Next Page
Loading...
