Name: Julabo DYNEO DD
Brand: Julabo
Rating: 4 (1 reviews)

To Next Page

Heating immersion circulators, heating circulators with open

baths, refrigerated circulators

Original operating manual

1.950.1300.en.V04 12/2022

www.calcert.com sales@calcert.com1.888.610.7664

Table of Contents3
Foreword7
About this Manual8
Original JULABO Spare Parts8
Accessories8
Warnings9
Symbols Used10
Intended Use11
Safety12
Safety Instructions12
Safety Symbols14
Safety Function14
Product Description16
Product Overview16
Function Description16
Operating and Functional Elements17
Interfaces18
Connection of Pt100 Temperature Sensor18
RS232 Interface (Optional)19
USB-A Interface19
Analog Interfaces (Option)20
Alarm Output20
REG/EPROG Socket21
Standby Input22
Operating Interface23
Operation with the Central Controller24
Softkeys and Status Icons24
Alarm Messages25
Operator Messages26
Main Menu27
Settings Menu27
Record Data Menu27
Thermodynamics Menu28
Adjust Safety Menu28
Programmer Menu28
Menu Connect Unit28
Service Menu29
Install Unit Menu29
Technical Data30
Material of Parts that Come into Contact with the Medium32
Technical Data for Refrigerated Circulators33
Bath Fluids39
Hoses40
Transport and Installation41
Transporting the Device41
Install the Device at the Operating Location42
Initial Operation43
Mounting the Circulator43
Mount Heating or Refrigerated Circulator43
Connect the Device to the Power Supply44
Connect Bridge Mounted or Heating Circulator44
Connect Refrigerated Circulator45
Connecting an External System46
Connect an External System with Screw Connections47
Connect an External System with Barbed Fittings49
Switch on the Device and Set the Language50
Set High Temperature Safety Function50
Fill Device51
Set up Power Supply for the Refrigerated Circulator52
Adjusting the Flow of the Bath Fluid52
Set Chiller Mode53
Set Limit Values54
Set Temperature Warning Limits54
Adjusting Setpoint Limits54
Adjusting Actual Value Limits55
Band Limit for External Control55
Setting Band Limit56
Connect External Temperature Sensor56
Operation57
Switch on the Unit57
Switch off the Unit57
Start Temperature Control Application57
Basic Settings58
Set Language58
Set Date and Time58
Activate Autostart Function59
Set Physical Units59
Set Key Tones59
Record Data60
Record Measurement Data60
Reading out Blackbox Data60
Displaying Alarm Memory61
Thermodynamics62
Control Parameter62
Optimizing Temperature Curves63
Adjust Controller64
Limit Cooling Capacity and Heating Capacity64
Adjust Pump64
Remote Control Device65
Remote Control Device Using USB Interface65
Set RS232 Interface Parameters66
Remote Control Device Using RS232 Interface66
Set EPROG Input67
Set External Setpoint Values67
Set up Actuating Variable68
Request Device Status68
Working with the Programmer68
Setting the Timer69
Creating and Editing a Temperature Control Profile69
Delete Temperature Control Profile70
Set Profile Timer71
Profile Series Setup71
Configure Signal Outputs72
Configure Signal Outputs of the REG/EPROG Plug72
Activating Stand-By Input73
Adjusting the Temperature Sensor (ATC)73
Adjust Internal Temperature Sensor73
Adjust External Temperature Sensor74
Device Reset75
Maintenance76
Replace Detachable Power Cord76
Check Safety Symbols76
Check the Functionality of High Temperature Cut-Off76
Test the Low Liquid Level Safety Function77
Emptying77
Clean Device78
Device Storage79
Technical Service79
Warranty80
Disposal81
Device Disposal81
EC Declaration of Conformity82
Declaration of Conformity83
Appendix84
Interface Commands84
IN Commands84
OUT Commands87
Status Commands89
Status Messages89
Alarms and Warnings90

Julabo DYNEO DD User Manual

Table of Contents

Other manuals for Julabo DYNEO DD

Questions and Answers:

Julabo DYNEO DD Specifications

Related product manuals

Brand	Julabo
Model	DYNEO DD
Category	Laboratory Equipment
Language	English