To Next PageTo Next Page
Need help?Do you have a question about the Julabo FC600S and is the answer not in the manual?
General| Brand | Julabo |
|---|---|
| Model | FC600S |
| Category | Air Conditioner |
| Language | English |
Provides a detailed overview of the recirculating cooler's components and functionality.
Explains the intended purpose and suitable applications for the recirculating cooler.
Offers essential safety advice for operating and maintaining the recirculating cooler.
Provides instructions for the proper and environmentally friendly disposal of the unit.
Details the unit's compliance with European guidelines and warranty terms.
Lists key technical data, performance, and dimensions of the recirculating cooler models.
Covers built-in safety features and recommended environmental operating parameters.
Specifies requirements and quality standards for cooling water connection.
Explains the meaning of warning symbols and notes used throughout the manual.
Outlines critical safety precautions for connecting and operating the unit.
Identifies and describes the main controls, displays, and indicator lights on the unit.
Details the functions of the keys used for setting values and navigating menus.
Illustrates and identifies the connectors and ports located on the rear of the unit.
Guides users through the necessary steps before operating the recirculating cooler.
Explains how to install and use the return flow safety device.
Provides guidance on choosing appropriate bath fluids and connecting tubing.
Details the correct power connection and the procedure for filling the unit.
Describes the step-by-step process for draining the recirculating cooler.
Instructions for powering the unit on, off, and initiating the startup sequence.
Covers the initial start-up procedure and interpretation of basic display indicators.
Explains how to activate or deactivate the automatic start mode for convenience.
Guides on setting working, high, and low temperature limits for the unit.
Details how to adjust the control ratio for optimal feed/return flow temperature management.
Covers setting safety temperature limits and low liquid level protection features.
Explains how to adjust PID control parameters for optimized performance.
Lists common error messages and provides guidance on resolving them.
Details other error indicators and status messages for system monitoring.
Describes the function and connection of the stand-by input and alarm output.
Details the serial interface, correspondence, and necessary interface cables.
Identifies the connector for the return flow safety device and its voltage.
Guides on establishing communication between the unit and a PC or data system.
Provides a comprehensive list of commands for controlling the unit remotely.
Explains status and error messages when operating the unit via remote control.
Instructions for accessing and exiting the unit's configuration and calibration menus.
Details the process of setting various operational parameters via the menu system.
Lists and explains the adjustable parameters available in the configuration level.
Provides instructions for cleaning the exterior and internal components of the unit.
Outlines the steps for requesting repairs and returning the unit for service.
