Julabo FP50-MC User Manual

58 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

19510351_a.doc Druck: 17.03.09

English

Operating

manual

Refrigerated and Heating Circulators

F12-MC F25-MC F26-MC

F32-MC F33-MC F34-MC

FP35-MC FP40-MC FP50-MC

FPW50-MC

Innovative Temperature Technology

JULABO Labortechnik GmbH

77960 Seelbach / Germany

 +49 (0) 7823 / 51-0

 +49 (0) 7823 / 24 91

| info@julabo.de

Þ www.julabo.de

1.951.0351BE4 02/09

Table of Contents

Questions and Answers:

B
Brittney ThompsonAug 8, 2025
What to do if the Julabo FP50-MC cooling compressor has overload protection?
- R
  Robert WoodsAug 8, 2025
  If the cooling compressor has overload protection, it could be due to several reasons: poor air circulation, small distance to walls, dirt accumulated on condenser, high ambient temperature, or frequent on/off cycles. To resolve this, ensure proper air circulation, increase the distance to walls, clean the condenser, reduce the ambient temperature, and avoid short switch-off intervals.
A
Amy SmithAug 15, 2025
What to do if Julabo FP50-MC Air Conditioner shows a warning without a complete shutdown?
- J
  Jeremy JonesAug 15, 2025
  If the Julabo Air Conditioner shows a warning without a complete shutdown, it could be due to several reasons. The circulator may be operating without enough bath fluid, a tube breakage may have occurred, or the float may be defective. Replenish the bath tank with the bath fluid. If there was tube breakage, replace the tubing and replenish the bath tank with the bath fluid. If the float is defect, it should be repaired by authorized JULABO service personnel. Also, reconnect the cable or eliminate the short-circuit.
C
Cynthia WilliamsAug 20, 2025
What to do if my Julabo FP50-MC's early warning system signals a critical fluid level?
- K
  Karen CraneAug 20, 2025
  If the early warning system for low level signals a critical fluid level, replenish the bath tank with the bath fluid.
K
Kyle HansenAug 27, 2025
What to do if Julabo FP50-MC shows excess temperature alarm with a complete shutdown?
- A
  Angela SandersAug 27, 2025
  If there is an excess temperature alarm with a complete shutdown of the main functional elements, clean the air-cooled condenser.
L
Lisa DiazSep 1, 2025
What to do if Julabo FP50-MC displays special message 'CONFIGURATION ERROR'?
- S
  smithcharlesSep 1, 2025
  If the Julabo Air Conditioner displays the message 'CONFIGURATION ERROR', press enter to automatically perform a single modification of the configuration.

Julabo FP50-MC Specifications

General

Brand	Julabo
Model	FP50-MC
Category	Air Conditioner
Language	English

Summary

Intended Use of Circulators

Operator Responsibilities and Safety

Technical Specifications of Circulators

Comprehensive technical data for various circulator models.

Menu Functions and Settings

Troubleshooting and Error Messages

Guides users through common issues and provides solutions for error codes.

ATC Absolute Temperature Calibration

Remote Control Operation

Instructions for operating the circulator remotely via a computer.

Preparations for Operation

Installation Guidelines

Provides instructions for the proper installation of the circulator.

Bath Fluid Selection and Usage

Details on selecting and using appropriate bath fluids, including warnings.

Filling and Draining Procedures

Instructions for filling and draining the circulator's bath tank.

Operating Controls and Functional Elements

User Safety Notes and Warnings

General Safety Recommendations

External System Temperature Application

Operating Procedures

Power Connection Instructions

Unit Switching On and Off

Procedures for turning the circulator on, starting, and stopping operations.

Setting Operating Temperatures

Safety Installations and Warning Functions

Excess Temperature Protection Setup

Low Level Warning and Protection

High and Low Temperature Warning Functions

Remote Control Activation and Deactivation

Interface Parameters: Baud Rate, Handshake, Parity

PID Control Parameters (Xp, Tv, Tn)

Troubleshooting and Error Messages

Remote Control Operation

PC and Data System Communication

List of Remote Control Commands

Status Messages Explained

Error Messages Explained

Details and explanations for various error messages and codes.

Related product manuals

Preview: Julabo F250

Preview: Julabo FL300

Preview: Julabo F12-ED

Preview: Julabo F25-MC

Preview: Julabo F25-HE

Preview: Julabo F32-HE