Need help?Do you have a question about the Julabo F32-HE and is the answer not in the manual?
General| Brand | Julabo |
|---|---|
| Model | F32-HE |
| Category | Air Conditioner |
| Language | English |
Defines the intended application of the circulators for temperature control in baths and external systems.
Provides detailed technical data, dimensions, power, and performance for various models.
Lists crucial safety precautions for operation, installation, and maintenance to prevent injury or damage.
Provides guidance on placing the unit, ventilation requirements, and refrigerant room space considerations.
Explains how to connect the circulator for temperature control of closed and open external systems.
Explains how to safely connect the unit to the power supply, emphasizing earthing and cable integrity.
Describes the process of turning the circulator on, performing self-tests, and starting/stopping operation.
Details how to switch on the cooling machine and its automatic control based on temperature requirements.
Details the adjustment and function of the excess temperature safety device to prevent hazards.
Explains the two-stage low level protection system and its audible/visual warnings.
Describes how to configure warning signals to trigger a shutdown when limit values are exceeded.
Explains how to set warning values for over and sub temperatures for sensitive applications.
Covers various unit configurations like remote control, auto-start, time/date, and factory reset.
Details how to set up and use remote control via an RS232 serial interface.
Covers internal/external control settings and self-tuning options.
Explains the switchover between internal and external temperature control and the connection of a Pt100 sensor.
Introduces Absolute Temperature Calibration to compensate for temperature differences between the circulator and a measuring point.
Defines the type of ATC calibration (1, 2, or 3 points) and explains pairs of values.
Provides a step-by-step example of performing a 3-point calibration for internal control.
Lists and describes various error messages, their causes, and recommended actions.
Guides on configuring interface parameters and connecting the unit for remote control.
Explains how the circulator communicates with a PC or data system in remote control mode.
Lists and describes various error messages, their causes, and recommended actions.
To Next Page
