MA
TABLE OF CONTENTS
Operating manual .......................................................................................................... 5
1. Intended use .......................................................................................................... 5
1.1. Description ......................................................................................................... 5
2. Operator responsibility – Safety recommendations ............................................... 6
2.1. Disposal .............................................................................................................. 8
2.2. Technical specifications ..................................................................................... 9
Operating instructions .................................................................................................. 11
3. Safety notes for the user ...................................................................................... 11
3.1. Explanation of safety notes .............................................................................. 11
3.2. Explanation of other notes ............................................................................... 11
3.3. Safety recommendations ................................................................................. 11
4. Operating controls and functional elements ......................................................... 14
4.1. Circulator .......................................................................................................... 14
5. Preparations ......................................................................................................... 16
5.1. Installation ........................................................................................................ 16
5.2. Bath fluids ......................................................................................................... 16
5.3. Temperature application to external systems .................................................. 17
5.3.1. Tubing ...................................................................................................... 18
5.4. Filling / draining ................................................................................................ 19
5.5. Countercooling ................................................................................................. 19
6. Operating procedures .......................................................................................... 21
6.1. Power connection ............................................................................................. 21
6.2. Switching on / Start – Stop ............................................................................... 21
6.2.1. Switching on the circulator ....................................................................... 21
7. Setting of temperatures ............................................................................ 22
7.1. 1-setpoint mode / Direct setting of temperatures ............................................. 22
7.2. Using the pre-setting in the menu ........................................................ 22
8.
Safety installations, warning functions ..................................................... 24
8.1. Excess temperature protection ........................................................................ 24
8.1.1. Early warning system, low level protection .............................................. 25
8.2. Switch-over from warning to shutdown function ............................................... 26
3
To Next Page
Loading...