Julabo SL-6 - Page 58

Menu functions
58

The value >TmpValue< is only indicated
 In addition the measured temperature
value >CalValue X< is saved during the
next step.

 The value flashes. Set by using the
numeric keypad and confirm by pressing
.
 If only a 2-point calibration is carried out, the following menu items are
not indicated anymore

The value >TmpValue< is only indicated.
 In addition the measured temperature
value >CalValue X< is saved during the
next step.

 The value flashes. Set by using the
numeric keypad and confirm by pressing
.