Julabo SL-6 - Page 67

HL / SL
67
Level 2 Level 3 Parameter-level
Define the output value for channel 3
Possible parameters:
ActInt, ActExt, Power, Setpoint
 The parameter flashes, switch by pressing
and
Select the scale for channel 3.
 The value flashes. Set by using the
numeric keypad and confirm by pressing
.
 The value flashes. Set by using the
numeric keypad and confirm by pressing
.
Possible parameters: 0-20 mA, 4-20 mA
 The parameter flashes, switch by pressing
and
Possible parameters:
Setpoint, variable, flow rate, pressure
 The parameter flashes, switch by pressing
and