1 Introduction
8
1.3 Typographical conventions
Warning signs
The signs for Danger and Caution are used in this manual under the following
conditions:
V
Danger
This symbol is used where there may be danger to personnel if the instruc-
tions are disregarded or not followed accurately!
A
Caution
This symbol is used where there may be damage to equipment or data if the
instructions are disregarded or not followed accurately!
E
Caution
This symbol is used where special precautions must be taken when handling
electrostatically sensitive components.
Note signs
H
Note
This symbol is used to draw your special attention to a remark.
v
Reference
This sign refers to further information in other manuals, chapters or sections.
abc
1
Footnote
Footnotes are comments that refer to specific parts of the text. Footnotes
consist of two parts: a marking in the text and the footnote text.
The marking in the text is arranged as continuous superscript numbers.
h
Action
This sign marks the description of a required action.
The individual steps are indicated by this asterisk, e. g.
h Press the
h key
h Confirm with
E
To Next Page
Loading...
