Need help?Do you have a question about the JUMO LOGOSCREEN 500 and is the answer not in the manual?
General| Display | 5.7" TFT color display |
|---|---|
| Resolution | 640 x 480 pixels |
| Touchscreen | Yes |
| Connectivity | USB, Ethernet |
| Power Supply | 24 V DC |
| Protection Class | IP65 |
| Operating Temperature | 0°C to +50°C |
Describes the physical components of the instrument's interface, including the display and keys.
Details the configuration and use of analog input channels for measurement.
Covers the functionality of counters, integrators, and timers as software channels.
Details the creation and use of virtual channels via math and logic operations.
Covers recording capacity, storage rate, format, and duration of measurement data.
Guides through the process of configuring instrument settings like inputs, outputs, and interface.
Lists all instrument parameters, their paths, values, and descriptions.
Guides through configuring individual analog input channels, sensors, and scaling.
Details the setup for counter, integrator, and timer functions, including channel selection and type.
Describes settings for serial interfaces, protocols, baud rates, and data formats.
Guides through fine calibration adjustments for analog measurements.
Explains how to transfer data between the recorder and PC via diskette or interface.
Contains important safety and installation guidelines for electrical connections.
Illustrates the electrical wiring and terminal connections for the instrument.
To Next Page
