7
1 Introduction
1.3 Typographical conventions
1.3.1 Warning signs
The signs for Danger and Caution are used in this manual under the following
conditions:
V
Danger
This sign is used when there may be danger to personnel if the instructions
are disregarded or not followed accurately!
A
Caution
This sign is used when there may be damage to equipment or data if the in-
structions are disregarded or not followed accurately!
E
Caution
This sign is used where special care is required when handling electrostati-
cally sensitive components.
1.3.2 Note signs
H
Note
This sign is used where your special attention is drawn to a remark.
v
Reference
This sign refers to further information in other handbooks, chapters or sec-
tions.
abc
1
Footnote
Footnotes are notes which refer to certain points in the text.
Footnotes consist of two parts:
Marking in the text and the footnote text.
The marking in the text is arranged as continuous superscript numbers.
h
Action
This sign marks the description of a required action.
The individual steps are indicated by this asterisk, e. g.:
h Press the
h key
h Confirm with
E
To Next Page
Loading...
