Door
Enclosure Net
D-rings on Jumping Mat
Cord (O)
18. Locate the D-ring closest to the door. Thread one end of one of the cords (O) through the lower
eyelet of the enclosure net (N) above the D-ring and then thread the cord through the D-ring. Tie the
enclosure net to the D-ring, by making a double knot in the cord.
Door
Enclosure Net
Cord (O)
D-rings on Jumping Mat
19. Thread the cord (O) through the lower eyelet of the enclosure net (N) halfway between the first
D-ring and the D-ring to the left, and then thread the cord through the left. Repeat this procedure
until all the cords are threaded through the enclosure net and the D-rings as shown. Keep the cord
taut.
14
To Next Page
Loading...
