KNX Room actuator 230 V
Ref.-no.: RA 23024 REGHE
Operating instructions
Room actuator 230 V
Table of contents
1 Safety instructions 2
2 Device layout 2
3 Function 2
3.1 System Information 2
3.2 Designated use 3
4 Operation 4
4.1 Controls 4
4.2 Status indication 4
4.3 Modes of operation 4
4.4 Blind/shutter control priorities 5
5 Fitting and electrical connection 7
5.1 Installing the device 7
5.2 Connecting the device 8
5.3 Connecting switched loads 8
5.4 Connecting blind/shutter drives 8
5.5 Connecting 230 V valve drives 9
5.6 Attaching the bus terminal cap 9
6 Start-up 10
6.1 Measuring the blind/shutter and slat running times 10
6.2 Loading the physical address and the application software 10
7 Technical data 10
8 Help in case of trouble 12
9 Accessories 12
10 Guarantee 13
To Next Page
Need help?
General
