Why is the transmission oil indicator lit during operation on my Jungheinrich Forklifts?
If the transmission oil indicator is lit during operation of your Jungheinrich Forklifts, it could be due to a low transmission oil level. Check the transmission oil level and top up if necessary. Another potential cause is a contaminated radiator, so clean the radiator.
What to do if the engine is running but my Jungheinrich DFG 320 won't move?
If your Jungheinrich Forklifts engine is running but the truck isn't moving, ensure the travel direction switch is set to the required direction and not in neutral. Also, make sure the parking brake is released.
Why is my Jungheinrich Forklifts not reaching maximum speed?
If your Jungheinrich Forklifts isn't reaching its maximum speed, the transmission oil level might be too low. Check the transmission oil level and add more if needed.
Why is the lift speed so low on my Jungheinrich DFG 320 Forklifts?
If the lift speed of your Jungheinrich Forklifts is too low, it could be due to a low hydraulic reservoir oil level. Check the hydraulic oil and top up if necessary. Another possible cause is a contaminated or blocked hydraulic reservoir discharge system, so clean or replace it.
General| Brand | Jungheinrich |
|---|---|
| Model | DFG 320 |
| Category | Forklifts |
| Language | English |
Declares compliance with EU directives for industrial trucks, including Machinery and EMC directives.
Provides notes on operating instructions, safety notices, and copyright information.
Defines the intended purpose of the industrial truck for lifting, lowering, and transporting load units.
Details correct application, including load placement, lifting, and transporting instructions.
Specifies approved conditions for operation, including environments, temperature, and inclines.
Outlines the duties of the proprietor to ensure safe and intended use of the industrial truck.
Explains requirements for mounting or installing additional equipment on the forklift truck.
Describes the DFG/TFG 316-435 as a four-wheel IC motor sit-down forklift truck.
Explains that rated capacity depends on the model and can be derived from the model description.
Details the truck's assemblies and functional components with an overview diagram.
Provides detailed technical specifications including performance data, dimensions, weights, and more.
Illustrates and describes various identification points and data plates on the truck.
Discusses truck stability testing, factors affecting it, and warnings regarding loss of stability.
Describes methods for transporting the truck, considering mast assembly and local conditions.
Covers aspects of truck loading, including center of gravity and lifting procedures.
Provides instructions on how to securely fasten the truck during transport on a lorry or trailer.
Details safety instructions for assembly, commissioning, and initial preparation for truck operation.
Covers general safety regulations for handling diesel fuel and LPG, including warnings.
Provides procedures for fuelling the tank system with diesel fuel.
Details safety instructions and procedures for using LPG bottles and liquid gas tanks.
Explains the filling of refillable liquid gas tanks, including requirements and procedures.
Describes the display unit and level indicator for DFG and LPG bottle fuel levels.
Outlines safety regulations for operating the forklift truck, including driver authorization and responsibilities.
Defines the hazardous area around the truck and provides safety instructions for personnel within it.
Details the truck's displays and controls, including the control panel and instrument panel switches.
Covers checks and operations before starting daily operation and preparing the truck.
Provides safety regulations for truck operation, travel conduct, and hazardous situations.
Explains procedures for truck travel, including selecting direction and neutral locking.
Details the truck's braking systems, including service and parking brakes.
Provides instructions for safely lifting, transporting, and depositing loads with the truck.
Explains how to operate the lift mechanism and integrated attachments, including SOLO PILOT.
Outlines safety instructions for operating various types of additional attachments on the truck.
Provides safety instructions and procedures for towing trailers with the truck.
Describes various optional equipment available for the truck, such as steel cabs and camera systems.
Details the use and adjustment of the camera system for enhanced visibility.
Explains the tilt angle display and its function for monitoring truck tilt.
Describes the temperature control system and procedures for handling overheating warnings.
Guides users to identify and rectify basic faults, with a table of common issues and solutions.
Covers procedures for towing the truck, emergency lowering, and starting aid.
Highlights safety and environmental protection measures, warning against modifications.
Details safety regulations for maintenance and repair personnel, including lifting and jacking.
Emphasizes the importance of servicing and inspection, providing a checklist for DFG and TFG trucks.
Provides a detailed maintenance checklist for DFG trucks, covering standard and optional equipment.
Provides a detailed maintenance checklist for TFG trucks, covering standard and optional equipment.
Covers safe handling of consumables, lubricants, and the lubrication schedule for the truck.
Details procedures for preparing the truck, opening panels, and performing maintenance tasks.
Provides instructions for decommissioning the truck, including storage and jacking procedures.
Outlines safety tests and inspection requirements for the truck at regular intervals and after incidents.
Specifies procedures for final decommissioning and disposal of the truck according to regulations.
To Next Page