EasyManua.ls Logo

Jungheinrich EFG 318 - User Manual

Jungheinrich EFG 318
243 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
09.09 -
03.13
51151902
EFG 213-320
Operating instructions G
EFG 316
EFG 215
EFG 216k
EFG 216
EFG 218k
EFG 218
EFG 220
EFG 316k
EFG 318k
EFG 318
EFG 320
EFG 213

Table of Contents

Questions and Answers

  • L
    Laura HoustonAug 8, 2025
    What to do if my Jungheinrich EFG 318 Forklifts truck does not start?
    • A
      Amanda DeanAug 9, 2025
      If your Jungheinrich Forklift doesn't start, several factors could be at play. Ensure the battery connector is properly plugged in. Check that the EMERGENCY DISCONNECT is not pressed. The key switch should be in the “I” position. Also, verify the battery charge and charge if necessary. Make sure the battery door is closed, and the on-board charger is not active. Finally, inspect the fuses for any faults.
  • M
    michael33Aug 18, 2025
    What to do if I see an error message displayed on Jungheinrich EFG 318?
    • R
      Rachel HarrisonAug 18, 2025
      If you see an error message displayed on your Jungheinrich Forklifts, try pressing the EMERGENCY DISCONNECT isolator or turning the key switch to 0. Wait approximately 3 seconds, and then attempt the operation again.
  • K
    Kathy MartinezAug 28, 2025
    Why my Jungheinrich Forklifts load cannot be lifted?
    • H
      hermanmelindaAug 28, 2025
      If your Jungheinrich Forklifts cannot lift a load, first ensure the truck is operational by checking the points listed under “Truck does not move.” Also, verify that the hydraulic oil level is adequate and inspect the fuses for any issues.

Summary

A Correct Use and Application

B Truck Description

Assemblies and Functional Description

Technical Specifications

Provides detailed performance data, dimensions, weights, and technical parameters.

D Battery - Servicing, Recharging, Replacement

Safety Regulations Governing the Handling of Lead-Acid Batteries

Essential safety measures for handling, charging, and maintaining lead-acid batteries.

Charging the battery

Procedure for charging the battery using stationary or on-board chargers.

Battery removal and installation

Step-by-step guide for safely removing and installing batteries using various methods.

E Operation

Safety Regulations for the Operation of the Forklift Truck

Guidelines for driver authorization, operator responsibilities, and safe truck operation.

Displays and Controls

Identifies and explains the functions of various control elements and displays on the truck.

Preparing the Truck for Operation

Covers daily checks, entry/exit, operator position setup, and seat belt usage.

Industrial Truck Operation

Safety regulations for travel, hazardous situations, and load handling.

Troubleshooting

Guidance on identifying and rectifying basic faults and interpreting error messages.

F Industrial Truck Maintenance

Operational Safety and Environmental Protection

Maintenance Safety Regulations

Hydraulic system

Maintenance and repairs

Safety tests to be performed at intervals and after unusual incidents

Maintenance checklist EFG 213-220

Maintenance checklist EFG 316-320

Jungheinrich EFG 318 Specifications

General IconGeneral
BrandJungheinrich
ModelEFG 318
CategoryForklifts
LanguageEnglish

Related product manuals