EasyManua.ls Logo

Jungheinrich EFG 218k - User Manual

Jungheinrich EFG 218k
243 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
09.09 -
03.13
51151902
EFG 213-320
Operating instructions G
EFG 316
EFG 215
EFG 216k
EFG 216
EFG 218k
EFG 218
EFG 220
EFG 316k
EFG 318k
EFG 318
EFG 320
EFG 213

Table of Contents

Questions and Answers

  • R
    Rachael FernandezAug 10, 2025
    What to do if my Jungheinrich Forklifts truck does not start?
    • M
      Morgan GatesAug 10, 2025
      If your Jungheinrich Forklift doesn't start, several factors could be at play. Ensure the battery connector is properly plugged in. Check that the EMERGENCY DISCONNECT is not pressed. The key switch should be in the “I” position. Also, verify the battery charge and charge if necessary. Make sure the battery door is closed, and the on-board charger is not active. Finally, inspect the fuses for any faults.
  • J
    John BensonAug 19, 2025
    What to do if I see an error message displayed on Jungheinrich Forklifts?
    • P
      petersjamesAug 20, 2025
      If you see an error message displayed on your Jungheinrich Forklifts, try pressing the EMERGENCY DISCONNECT isolator or turning the key switch to 0. Wait approximately 3 seconds, and then attempt the operation again.
  • D
    David MorrisonAug 28, 2025
    Why my Jungheinrich EFG 218k Forklifts load cannot be lifted?
    • R
      Rachel GallagherAug 28, 2025
      If your Jungheinrich Forklifts cannot lift a load, first ensure the truck is operational by checking the points listed under “Truck does not move.” Also, verify that the hydraulic oil level is adequate and inspect the fuses for any issues.

Jungheinrich EFG 218k Specifications

General IconGeneral
Load Capacity1800 kg
Lift Height3000 mm
Battery Voltage48 V
Battery Capacity500 Ah
DriveElectric
Tyre TypeSuperelastic

Related product manuals