What to do if I see an error indication in display of Jungheinrich EFG-Vac 30 Trucks?
If you see an error on the display of your Jungheinrich Trucks, try this: Press the master EMERGENCY OFF switch or turn the key switch to the “0” position. Wait about 3 seconds, and then try the function you were trying to use again.
What to do if my Jungheinrich EFG-Vac 30 does not move?
If your Jungheinrich Truck doesn't move, here's what to check: * Ensure the battery plug is securely connected. * Make sure the master switch is released. * Verify the key switch is in the “I” position. * Check the battery charge and recharge if needed. * Inspect the fuses for any defects.
Why my Jungheinrich EFG-Vac 30 Trucks load cannot be lifted?
If the load cannot be lifted by your Jungheinrich Trucks, make sure of the following: 1. The truck is ready for operation (perform checks for the fault “Truck does not move”). 2. The hydraulic oil level is adequate. 3. The fuses are in good condition. 4. The battery has sufficient charge (recharge if necessary).
General| Brand | Jungheinrich |
|---|---|
| Model | EFG-Vac 30 |
| Category | Trucks |
| Language | English |
Overview of the electric rider-controlled forklift's construction and intended uses.
Identification and explanation of the forklift's main components and their roles.
Detailed description of the truck's core systems including steering, drive, and hydraulics.
Comprehensive technical data, performance metrics, weight, tyre, and trailer load specifications.
EN standards, application conditions, and location of important labels and identification plates.
Understanding the truck's identification plate and interpreting load diagrams for safe lifting.
Procedures and safety guidelines for lifting and transporting the truck using a crane.
Steps for preparing and putting the truck into service after delivery or transport.
Methods for moving the truck with the drive unit inoperative and towing procedures.
Essential safety regulations for handling lead-acid batteries to prevent hazards.
Details on different battery types compatible with the truck and their specifications.
Procedures for opening the battery hood and accessing the battery for service.
Steps for charging the battery safely and connecting/disconnecting the battery plug.
Instructions for safely removing, installing the battery, and closing the battery cover.
Explanation of battery discharge indicators and the operating hour meter functions.
Key safety rules and driver responsibilities for operating the forklift.
Identification and function of all controls, switches, and displays on the truck.
Pre-operation checks, seat adjustment, and safety restraint belt usage.
Detailed guidance on driving conduct, steering, braking, and safe operation.
Procedures for operating lifting mechanisms and safely picking up/transporting loads.
Instructions for parking the truck and towing trailers, including load limits.
Guidance on identifying and resolving minor faults and malfunctions.
Safety and environmental considerations during maintenance operations.
Specific safety rules for personnel performing maintenance tasks on the truck.
Overview of service intervals and checklist for regular inspections.
Lubrication schedule, fuels, coolants, and lubricants handling and specifications.
Procedures for checking tyres, brakes, and hydraulic system components.
Steps for transmission oil checks, filter changes, fuse checks, and safety belt service.
Procedures for preparing the truck for service and for long-term storage.
Requirements for regular safety checks by qualified inspectors.
To Next Page