3.2 Customer Service
3.2.1 Maintenance contents
In accordance with the EJE 230 service interval, to be performed every 1000 service
hours, but at least once a year.
3.2.1.1 Standard equipment
Brakes
Test the function of the brakes
Measure the air gap of the magnetic brake.
Electrical system
Adjust the microswitches.
Test the contactors and/or relays.
Carry out a chassis insulation-resistance test.
Clean the motor (engine?) with compressed air.
Hydraulic operations
Correct the hydraulic oil level.
Test and adjust the pressure relief valve.
Agreed services
Carry out a test run with the rated load or a customer-specific load.
Demonstration after maintenance.
Lubricate truck according to the lubrication diagram.
Steering
Test the tiller return function.
196
04.19 en-GB
To Next Page
Loading...
Need help?
General
