4.10.6 Lowering two palletised loads in turn
Z
ERC 212z-216z only
Z
For double decker option only
CAUTION!
Loads must not be deposited on travel or escape routes, in front of safety
mechanisms or plant equipment that must be accessible at all times.
Requirements
– Storage location suitable for storing the load.
Procedure
• Drive the truck carefully up to the first storage location.
• Lower the support arms until the load is resting on the floor.
• Carefully move the support arms out of the pallet.
• Lower the load handler, see page 99.
• Drive the truck carefully up to the second storage location.
• Lowers the load handler.
Z
To avoid damaging the load and the load handler, avoid setting the load down
abruptly.
• Lower the load handler so that it is clear of the load (see page 95).
• Carefully drive the load handler out from beneath the pallet.
Both pallets are lowered.
104
04.19 en-GB
To Next Page
Loading...
Need help?
General
