EasyManuals Logo

Jungheinrich ERC 216 User Manual

Jungheinrich ERC 216
248 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #195 background imageLoading...
Page #195 background image
6 Safety tests to be performed at intervals and after unusual
incidents
The truck must be inspected at least annually (refer to national regulations) or after
any unusual event by a qualified inspector. The manufacturer offers a safety
inspection service which is performed by personnel specifically trained for this
purpose.
A complete test must be carried out on the technical condition of the truck with
regard to safety. The truck must also be examined thoroughly for damage.
The operating company is responsible for ensuring that faults are rectified
immediately.
7 Final de-commissioning, disposal
Z
Final de-commissioning or disposal of the truck in must be performed in accordance
with the regulations of the country of use. In particular, regulations governing the
disposal of batteries, consumables and electronic and electrical systems must be
observed.
The truck must only be disassembled by trained personnel in accordance with the
procedures as specified by the manufacturer.
8 Human vibration measurement
Z
Vibrations that affect the operator over the course of the day are known as human
vibrations. Excessive human vibrations will cause the operator long term health
problems. The European "2002/44/EC/Vibration" operator directive has therefore
been established to protect operators. To help operators to assess the application
situation, the manufacturer offers a service of measuring these human vibrations.
193
04.19 en-GB

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jungheinrich ERC 216 and is the answer not in the manual?

Jungheinrich ERC 216 Specifications

General IconGeneral
BrandJungheinrich
ModelERC 216
CategoryForklifts
LanguageEnglish

Related product manuals