141
11.14 EN
Switching the seat heating on and off (optional equipment)
Procedure
• Press the seat heating switch (199).
Switch setting 1 = Seat heating on.
Switch setting 0 = Seat heating off.
8.5 Fire Extinguisher
Procedure
• Open the fasteners (200)
• Pull the fire extinguish out of its bracket
Z To operate, refer to the illustrations on the fire
extinguisher
8.6 Rockinger Coupling with Hand Lever
Z Refer to the instructions for towing trailers, see "Towing trailers" on page 128.
CAUTION!
Incorrectly coupled trailers can cause
accidents
XMake sure the coupling is engaged
securely before starting the truck.
XThe contro pin (203) must be flush with
the control sleeve (201).
Rockinger Coupling Operation
Attaching a trailer
Procedure
• Prevent the trailer from rolling away.
• Adjust the trailer pull rod to the height of the
coupling.
• Pull up on the hand lever (202).
• Slowly reverse the truck until the coupling engages.
• Press down on the hand lever (202).
Disconnecting a trailer
Procedure
• Prevent the trailer from rolling away.
• Pull up on the hand lever (202).
200
To Next Page
Loading...
