183
11.14 EN
4.11 Check the transmission oil level
Procedure
• Prepare the truck for maintenance and repairs.
• Check the oil level with the dipstick (249).
Slowly insert the dipstick into the transmission
to prevent false measurements.
Z Check the oil level for the transmission while
the motor is at idle. The oil must be at
operating temperature.
• Add the correct grade of transmission oil
through the filler neck as required.
4.12 Performing Other Maintenance Work
CAUTION!
XSpecial knowledge and in some cases special tools are required to perform other
maintenance work (especially changing oil and filters) according to the
maintenance checklist (section see "Servicing and Inspection" on page 199).
These tasks should therefore only be performed by the manufacturer's customer
service department.
Z If service intervals are not observed as specified by the maintenance checklist see
"Preparing the truck for maintenance and repairs" on page 162, the manufacturer's
warranty will become void.
4.13 Closing the Motor Compartment
Procedure
• Remove tools and other objects from the motor compartment.
DANGER!
No persons are permitted in the area around the cab while it is being lowered.
To Next Page
Loading...
Need help?
General
