11.14 EN
216
10 Clean the engine oil cooler. t
11 Check and clean radiator. t
12 Check transmission for noise and leakage. t
13 Replace transmission oil. t
14 Check tyre air pressure and top up if necessary. t
15 Check wheels for wear and damage. t
16 Check wheel suspension and attachment. t
17 Test starter and generator, Check wires and attachment. t
18 Replace engine oil filter. t
19 Note: replace multi-V belt every 3000 service hours.
20
Check V belt / multi-V belt is tensioned and check for damage.
Replace if necessary.
t
21 Replace air filter. t
22 Check air filter, replace if necessary. t
23 Check engine for noise and leakage. t
24 Replace engine oil. t
25 Check engine suspension. t
26 Test water pump and the fans. t
27 Replace the spark plugs. t
28 Check drive axle for noise and leakage. t
29 Replace drive axle oil. t
30 Clean or replace transmission oil suction filter if necessary. t
Chassis and Superstructure W A B C
1 Check chassis and screw connections for damage. t
2 Check doors and/or covers. t
3 Check labels are legible and complete. t
4 Check attachment and setting function of the driver's seat. t
5 Check condition of the driver’s seat. t
6
Check engine compartment for contamination and clean if
necessary.
t
7 Check attachment of the counterweight. t
8 Check mast attachment / mounting. t
9 Check trailer coupling or tow mechanism stop. t
10
Check overhead guard and / or cab are secure and check for
damage.
t
11 Check operator mat and steps are non-slip and damage-free. t
12 Test driver's seat restraint system and check for damage. t
Travel W A B C
To Next Page
Loading...
Need help?
General
