To Next Page

To Previous Page

JUNOSe 7.2.x Policy Management Configuration Guide

124 ! Policy Management show Commands

show classifier-list

! Use to display CLACL configurations.

! Use the brief or detail keywords with the show classifier command to display

different levels of information.

! Field descriptions—Fields displayed vary depending on the type and

configuration of the CLACL:

! Reference count—Number of times the CLACL is referenced by policies

! Entry count—Number of entries in the classifier list

! Classifier-List—Name of the classifier list

! Entry—Entry number of the classifier list rule

! Color—Packet color to match: green, yellow, or red

! Protocol—Protocol type

! Not Protocol—If true, matches any protocol except the preceding protocol;

if false, matches the preceding protocol

! Source IP Address—Address of the network or host from which the packet

is sent

! Source IP WildcardMask—Mask that indicates addresses to be matched

when specific bits are set

! Not Source Ip Address—If true, matches any source IP address and mask

except the preceding source IP address and mask; if false, matches the

preceding source IP address and mask

! Destination IP Address—Number of the network or host from which the

packet is sent

! Destination IP WildcardMask—Mask that indicates addresses to be

matched when specific bits are set

! Not Destination Ip Address—If true, matches any destination IP address

and mask except the preceding destination IP address and mask; if false,

matches the preceding destination IP address and mask

! Traffic Class—Name of the traffic class to match

! User Packet Class—User packet value to match

! DS Field—DS field value to match

! TOS Byte—ToS value to match

! Precedence—Precedence value to match

! User Priority bits—User priority bits value to match

! Traffic Class Field—Traffic class field value to match

! EXP Bits—MPLS EXP bit value to match

! EXP Mask—Mask applied to EXP bits before matching

! DE Bit—Frame Relay DE bit value to match

! Destination Route Class—Route class used to classify packets based on the

packet’s destination address

Brand	Juniper
Model	E320
Category	Network Router
Language	English

Juniper E320 User Manual

Table of Contents

Questions and Answers:

Juniper E320 Specifications

Related product manuals