Juniper E320 User Manual

Applying Policy Lists to Interfaces and Profiles ! 73
Chapter 2: Creating Policies
Use the show classifier-list and show policy-list commands to view information
about the policy:
host1#show classifier-list
Classifier Control List Table
---------- ------- ---- -----
IP clin_8_00.1 tcp host 10.2.1.2
host1#show policy-list
Policy Table
------ -----
IP Policy plin_8
Administrative state: enable
Reference count: 1
Classifier control list: clin_8_00, precedence 100
mark 5 mask 170
traffic-class someTcl
rate-limit-profile someRlp
Referenced by interface(s):
ATM11/0.0 input policy, statistics enabled, virtual-router default
Referenced by profile(s):
No profile references
Marking value 05 5
Marking mask aa 170
Traffic class 0773 6f6d6554 636c someTcl
Rate-limit profile 0773 6f6d6552 6c70 someRlp
Table 8: Ascend-Data-Filter Example 4 Values (continued)
Action or Classifier Hex Value Actual Value

Juniper E320 Specifications

General

Brand	Juniper
Model	E320
Category	Network Router
Language	English