What to do if the ALM LED is red on my Juniper EX4600?
If the ALM LED on your Juniper Switch is red, it indicates a major alarm. Check for physical conditions such as power supply failure, excessive component temperature, or media failure.
Why is the ALM LED yellow on my Juniper EX4600?
A yellow ALM LED on your Juniper Switch signals a minor alarm. You should check for possible issues that don't rise to the level of a major alarm.
How to troubleshoot an unlit ALM LED on a Juniper EX4600 Switch?
If the ALM LED is unlit on your Juniper Switch, it could mean there's no alarm or the switch has halted. Verify that the switch is powered on and operating normally, or check for other operational issues.
What to do if my Juniper EX4600 Switch has a chassis alarm?
If your Juniper Switch is showing a chassis alarm, you should check for a power supply failure, excessive component temperature, or media failure.
Why is my Juniper EX4600 showing a system alarm?
If your Juniper Switch displays a system alarm, it may indicate a missing rescue configuration or a failure to install a license for a licensed software feature. Check these aspects to resolve the alarm.
Introduces the Juniper Networks EX4600 as a compact, scalable, high-performance 10GbE solution for enterprise campus and data center environments.
Provides steps to install an AC-powered EX4600 in a four-post rack, referencing the hardware guide for DC-powered models.
Guides the user through connecting the EX4600 to power after installation, including grounding and power cord connection.
Describes the factory-default settings that enable plug-and-play operation when the EX4600 switch is powered on.
Explains how to customize the factory-default configuration using CLI commands, including hostname and IP address settings.
Suggests post-configuration tasks such as downloading licenses, configuring user access, and setting up security services.
Provides links to additional documentation for the EX4600, including installation guides and release notes.
Highlights video resources for learning about EX4600 installation, configuration, and Juniper technologies.
General| Rack Units | 1U |
|---|---|
| Junos OS | Yes |
| Product Series | EX Series |
| DRAM | 8 GB |
| Flash Memory | 16 GB |
| Ports | 4 x 40GbE QSFP+ ports |
| Power Supply | Dual, hot-swappable |
| MAC Address Table Size | 288, 000 |
| Jumbo Frames | 9216 bytes |
| Input Voltage | 100-240 V AC |
| Operating Temperature | 0°C to 40°C |
| Memory | 8 GB |
| Storage | 16 GB |
To Next Page
