Need help?Do you have a question about the Juniper EX4650 Series and is the answer not in the manual?
General| Cooling | Front-to-back or back-to-front airflow |
|---|---|
| Rack Units | 1U |
| MAC address table size | 288, 000 entries |
| Memory | 16 GB |
| Storage | 64 GB SSD |
| Power Supply | Dual redundant, hot-swappable |
| Junos OS | Supported |
| Jumbo frames | 9216 bytes |
| Operating temperature | 0°C to 40°C (32°F to 104°F) |
| Input voltage | AC: 100-240V |
| Fans | Hot-swappable, redundant |
| Operating humidity | 5% to 90% (non-condensing) |
| Ports | 48 x 10GbE SFP+/SFP28 ports 8 x 40GbE QSFP+/100GbE QSFP28 ports |
Overview of the EX4650 switch system and its capabilities.
Details the hardware components, ports, and models of the EX4650 switch.
Lists and describes the different EX4650 switch models available.
Guidelines and requirements for the EX4650 switch site installation.
Specifications for installing EX4650 switches in standard racks.
Clearance needs for EX4650 switch airflow and hardware maintenance.
Procedures for unpacking and physically mounting the EX4650 switch.
Steps for connecting the EX4650 switch to AC or DC power sources.
Steps to configure the Junos OS on the EX4650 switch.
Procedures for maintaining the EX4650 switch cooling system, including fan modules.
Instructions for maintaining the AC and DC power supplies of the EX4650 switch.
Guidance on removing and installing transceivers in the EX4650 switch.
General guidance for troubleshooting EX4650 switch hardware issues.
Procedure to create an emergency boot device for Junos OS installation.
Process for returning EX4650 hardware for repair or replacement.
Steps to contact JTAC and obtain an RMA number.
Essential safety advice for operating and working with the device.
Guidelines and warnings for safe handling of lasers and LEDs.
General electrical safety practices and warnings.
To Next Page