Locating the Serial Number on an EX4650 Switch or Component
IN THIS SECTION
Listing the Switch and Components Details using the CLI | 138
Locating the Chassis Serial Number ID Label on an EX4650 Switch | 139
Locating the Serial Number ID Labels on FRUs in an EX4650 Switch | 139
If you are returning a switch or hardware component to Juniper Networks for repair or replacement, you
must locate the serial number of the switch or component. You must provide the serial number to the
Juniper Networks Technical Assistance Center (JTAC) when you contact them to obtain Return Materials
Authorization (RMA).
If the switch is operational and you can access the CLI, you can list the serial numbers for the switch and
for some components using a CLI command. If you do not have access to the CLI or if the serial number
for the component does not appear in the command output, you can locate the serial number ID label on
the physical switch or component.
NOTE: If you want to find the serial number on the physical switch component, you will need to
remove the component from the switch chassis, for which you must have the required parts and
tools available.
Listing the Switch and Components Details using the CLI
To list the switch and switch components and their serial numbers, enter the following CLI command:
show chassis hardware
The following output lists the switch components and serial numbers for an EX4650 switch:
user@switch> show chassis hardware
For information about the show chassis hardware command, see show chassis hardware.
138
To Next Page
Loading...
Need help?
General
