Table 4: J-series Guides and Related JUNOS Software Publications (continued)
Corresponding JUNOS Software ManualChapter in a J-series Guide
■
JUNOS System Basics and Services Command Reference
■
JUNOS Interfaces Command Reference
■
JUNOS Routing Protocols and Policies Command Reference
“Monitoring the Router and Routing Operations”
■
JUNOS System Log Messages Reference
■
Secure Configuration Guide for Common Criteria and
JUNOS-FIPS
“Monitoring Events and Managing System Log Files”
JUNOS System Basics Configuration Guide“Configuring and Monitoring Alarms”
JUNOS Software Installation and Upgrade Guide“Performing Software Upgrades and Reboots”
■
JUNOS System Basics and Services Command Reference
■
JUNOS Interfaces Command Reference
■
JUNOS Routing Protocols and Policies Command Reference
“Using Services Router Diagnostic Tools”
JUNOS Services Interfaces Configuration Guide“Configuring Packet Capture”
JUNOS System Basics and Services Command Reference“Configuring RPM Probes”
Documentation Feedback
We encourage you to provide feedback, comments, and suggestions so that we can
improve the documentation. You can send your comments to
techpubs-comments@juniper.net, or fill out the documentation feedback form at
http://www.juniper.net/techpubs/docbug/docbugreport.html. If you are using e-mail, be sure
to include the following information with your comments:
■ Document name
■ Document part number
■ Page number
■ Software release version
Requesting Support
For technical support, open a support case with the Case Manager link at
http://www.juniper.net/support/ or call 1-888-314-JTAC (from the United States, Canada,
or Mexico) or 1-408-745-9500 (from elsewhere).
Documentation Feedback ■ xxi
About This Guide