Juniper LTE Mini-PIM - LTE Mini-Physical Interface Module Leds

LTE Mini-Physical Interface Module LEDs
Figure 3 on page 6 shows the LEDs on the LTE Mini-PIM.
Figure 3: LTE Mini-PIM LEDs
g009650
Table 7 on page 6 lists the LEDs on the LTE Mini-PIM and their indications.
Table 7: LTE Mini-PIM LED States
DescriptionLED
Solid green (one bar)—Low signal strength (<= –99 dBm).SIG (Received Signal Strength Indicator)
Solid green (two bars)—Low signal strength
(from –98 dBm to –87 dBm).
Solid green (three bars)—Low signal strength
(from –86 dBm to –76 dBm).
Solid green (four bars)—High signal strength (>= –75 dBm).
Unlit—No signal
Solid green—3G connection is established.3G
Blinking green—Connecting to a 3G network.
Solid green—LTE connection is established.LTE
Blinking green—Connecting to an LTE network.
Solid green—SIM1 is active.SIM1
Solid green—SIM2 is active.SIM2
6