Juniper LTE Mini-PIM - Upgrading the Modem Firmware by Using OTA Upgrade

Upgrading the Modem Firmware Though Over-the-Air (OTA) | 20
Upgrading the Modem Firmware by Using OTA Upgrade
Over-the-air (OTA) firmware upgrade enables automatic and timely upgrade of modem firmware when
new firmware versions are available. The OTA upgrade can be enabled or disabled on the 4G/LTE Mini-PIM.
OTA upgrade is disabled by default.
1. Enable OTA upgrade status on the LTE Mini-PIM:
user@host > request modem wireless fota enable
2. Initiate the firmware upgrade:
user@host > request modem wireless upgrade cl-slot number/0/0
3. Verify the firmware upgrade status:
user@host > show modem wireless firmware cl-slot number/0/0
LTE mPIM firmware details
Product name: Junos LTE mPIM
Serial number: AG50071852
Hardware version: AcceleratedConcepts/sprite
Firmware version: 17.4.3
MAC: 00:00:5e:00:53:61
System uptime: 3430 seconds
Wireless modem firmware details
Modem firmware version:
9999999_9904609_SWI9X30C_02.23.00.00_00_GENERIC_002.018_000
Modem Firmware build date: 22/10/2016
Card type: MC7430
Modem manufacturer: Sierra Wireless, Inc
Hardware version: 1.0
Power & Temperature: Normal 3343 mV, Normal 30.00 C
OTA status
State: Enabled
New firmware available: No
Number of SIM: 2
Slot of active: 2
Status of SIM 1
SIM state: SIM present
Modem PIN security status: Disabled
20