Juniper MX104 3D User Manual

CAUTION: The maximum torque rating of the grounding screws on the
router is 4.34 lb-in. (0.49 Nm). The grounding screws may be damaged if
excessive torque is applied. Use only a torque-controlled driver to tighten
screws. Use an appropriately sized driver, with a maximum torque capacity
of 5 lb-in. or less. Ensure that the driver is undamaged and properly
calibrated and that you have been trained in its use. You may wish to use
a driver that is designed to prevent overtorque when the preset torque
level is achieved.
9. Dress the grounding cable, and verify that it does not touch or block access to router
components, and that it does not drape where people could trip on it.
Figure 4: Grounding Points on the MX104 Router
2—1— ScrewsGrounding cable lug
9Copyright © 2016, Juniper Networks, Inc.
Connect the Grounding Cable

Juniper MX104 3D Specifications

General

Product Family	MX Series
Operating System	Junos OS
Model	MX104
Throughput	80 Gbps
Memory	8 GB
Operating Temperature	32°F to 104°F (0°C to 40°C)
Operating Humidity	5% to 90% noncondensing
Input Voltage	100-240 VAC, 50/60 Hz
Power Supply	Dual