Step 6: Perform Initial Software Configuration
IN THIS SECTION
Enter Configuration Mode | 21
Configure User Accounts and Passwords | 22
Configure System Attributes | 22
Commit the Configuration | 23
This procedure connects the router to the network but does not enable it to forward traffic. For complete
information about configuring the router to forward traffic, including examples, see the Junos OS
configuration guides.
To configure the software:
Enter Configuration Mode
1. Verify that the router is powered on.
2. Log in as the “root” user. There is no password.
3. Start the CLI.
root# cli
root@>
4. Enter configuration mode.
cli> configure
[edit]
root@#
21
To Next Page
Loading...
