NetScreen-5GT v
Preface
The Juniper Networks NetScreen-5GT provides IPSec VPN and firewall services for a
broadband telecommuter, a branch office, or a retail outlet. While at the entry level of the
NetScreen appliance product line, the NetScreen-5GT uses the same firewall, VPN, and
traffic management technology as NetScreen’s high-end central site products.
Juniper Networks offers three versions of NetScreen-5GT:
• The 10-user version supports up to 10 users.
• The Plus version supports an unrestricted number of users.
• The Extended version provides the same capabilities as the Plus version with
additional features: High Availability (NSRP Lite), the DMZ security zone, and
additional sessions and tunnel capacity.
ORGANIZATION
This manual has three chapters and one appendix.
Chapter 1, “Connecting the Device” describes how to install the NetScreen-5GT device in
a rack, connect the device to your network, and connect the power.
Chapter 3, “Configuring the Device” describes the default settings and operation of the
NetScreen-5GT and the configuration required to use the device with its default settings.
Chapter 4, “Hardware Descriptions” provides an overview of the NetScreen-5GT ports,
LEDs, and power requirements.
Appendix A, “Specifications” provides a list of physical specifications about the NetScreen-
5GT device.
CLI CONVENTIONS
The following conventions are used when presenting the syntax of a command line
interface (CLI) command:
• Anything inside square brackets [ ] is optional.
• Anything inside braces { } is required.
• If there is more than one choice, each choice is separated by a pipe ( | ). For
example,
set interface { ethernet1 | ethernet2 | ethernet3 }
manage
means “set the management options for the ethernet1, ethernet2, or ethernet3
interface”.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
